You are Here:- Home >> Talkswitch Hardware Upgrades >> TalkSwitch 240VS

Search By Manufacturers

IneedTelephones Search

Talkswitch Hard UPG 240Plus CT.TS001.124005

$900.00

CALL FOR BEST PRICES ON THE WEB

TalkSwitch 240VS Telephone System CT.TS001.124001

Includes everything you need for sophisticated call handling — auto attendants, voicemail, ring groups, remote extensions and much more.

2 traditional phone lines

4 extensions that can be configured for analog or IP phones

12 pure IP extensions

Need more? See our other systems, add upgrades or network up to four units. Maximum total TalkSwitch system capacity is 32 lines, 64 extensions and 32 VoIP trunks

Features of the Talkswitch 240vs:

  • VOICEMAIL
  • AUTO ATTENDANTS
  • REMOTE EXTENSIONS
  • AUTO FAX DETECTION
  • DIAL-BY-NAME DIRECTORY
  • AUTOMATIC ROUTE SELECTION
  • MUSIC ON HOLD
  • USER-CONFIGURABLE
  • CALL FORWARD
  • CALL CASCADE
  • CALL DETAIL RECORD LOGGING
  • RING GROUPS
  • CELL/PAGER/E-MAIL NOTIFICATION OF NEW MESSAGES
  • CALL BACK/CALL BRIDGE
  • CALL HOLD/PARK/PICKUP
  • CALL TRANSFER
  • CALL CONFERENCE
  • INTERCOM
  • PUBLIC ADDRESS
  • CALL QUEUE
  • MODE SCHEDULING
  • HOLIDAY MODE
  • CALL SCREENING
  • DISTINCTIVE RING
  • USES STANDARD PHONES
  • EXPANDABLE
  • FLASH UPGRADEABLE
  • EXPANDABLE MEMORY
  • UNIFORM CALL DISTRIBUTION
  • System info for the Talkswitch 240vs:
    Analog trunks 2
    VoIP trunks 4
    USB interface 1
    Ethernet interface 1
    Memory expansion 1, 2, 4.5 and 9 hour memory cards, 1- or 2-hour license codes
    Power-failure line to extension jacks Extension 4 connects to Line 1
  • Analog extension interface
    Connector type RJ-11, 2-pin
    Trunk type Loop start
    Interface impedance 600 ohms
    Loop range 0–600 ohms
    Hook flash supported Yes
    On-hook voltage 35 volts
    Off-hook loop voltage source 35 volts
    Off-hook loop current 23 mA to 40 mA
    Dial tone level -2.4 dBm
    Ringing voltage 90 volts RMS
    Ringing frequency 20 Hz – true sine wave
    Total ringing load 5 REN
  • Analog trunks
    Connector type RJ-11, 2-pin
    Trunk type Loop start
    Interface impedance Configurable, 600 ohms, 600 complex, 900 ohms, 900 complex
    Ringing impedance 3,900 ohms
    Ringing sensitivity 45 volts RMS @ 20 Hz
    REN 0.7B
    Longitudinal balance 69 dB
    Signal level -10 dB
    Distinctive ring supported Yes
    Caller ID support FSK, all lines
  • Dimensions (H x W x L)
    Metric 51.6 mm x 203.2 mm x 213.4 mm
    Imperial 2.03" x 8" x 8.4"
  • Weight of the Talkswitch 240vs
    Metric 0.65 kg
    Imperial 1.43 lbs

 

Use online coupon code "Talk71808" to get 15% off advertised price

To get lowest price on internet give us a call

Home | Custom Quotes | Privacy Policy | Store Policy | Resources | Sitemap | Blog

INeedTelephones.Com - 4 Beaver Brook Rd #141, Lincoln Park NJ
Questions? Call us Toll-Free at 1-866-370-5576

Copyright INeedTelephones.Com, designed & promoted by www.urmansoft.net